all_apex_contributions

name , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

android_info

android_info module generate a file named android-info.txt that contains various information about the device we're building for. This file is typically packaged up with everything else.
name , arch , board_info_files , bootloader_board_name , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , stem , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 arch interface
 board_info_files list of string, Paths of board-info.txt files.
 bootloader_board_name string, Name of bootloader board. If board_info_files is empty, `board={bootloader_board_name}` will be printed to output. Ignored if board_info_files is not empty.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 stem string, Name of output file. Defaults to module name
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

apex_contributions

apex_contributions contains a list of module names (source or prebuilt) belonging to the mainline module An apex can have multiple apex_contributions modules with different combinations of source or prebuilts, but only one can be selected via product_config.
name , defaults , api_domain , compile_multilib , contents , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 defaults list of string
 api_domain string, Name of the mainline module
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 contents list of string, A list of module names that should be used when this contribution is selected via product_config The name should be explicit (foo or prebuilt_foo)
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

apex_contributions_defaults

name , defaults , host_supported , device_supported , apex_available , api_domain , arch , compile_multilib , contents , debug_ramdisk , defaults_visibility , device_specific , dist , dists , enabled , host_required , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 defaults list of string
 host_supported bool, If set to true, build a variant of the module for the host. Defaults to false.
 device_supported bool, If set to true, build a variant of the module for the device. Defaults to true.
 apex_available list of string, Availability of this module in APEXes. Only the listed APEXes can contain this module. If the module has stubs then other APEXes and the platform may access it through them (subject to visibility). "//apex_available:anyapex" is a pseudo APEX name that matches to any APEX. "//apex_available:platform" refers to non-APEX partitions like "system.img". Prefix pattern (com.foo.*) can be used to match with any APEX name with the prefix(com.foo.). Default is ["//apex_available:platform"].
 api_domain string, Name of the mainline module
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 contents list of string, A list of module names that should be used when this contribution is selected via product_config The name should be explicit (foo or prebuilt_foo)
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 defaults_visibility list of string, Controls the visibility of the defaults module itself.
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

build_prop

build_prop module generates {partition}/build.prop file. At first common build properties are printed based on Soong config variables. And then prop_files are printed as-is. Finally, post_process_props tool is run to check if the result build.prop is valid or not.
name , android_info , arch , block_list , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , footer_files , host_required , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_config , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , relative_install_path , required , soc_specific , stem , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 android_info string, Path to android-info.txt file containing board specific info. This is empty for build.prop of all partitions except vendor.
 arch interface
 block_list list of string, List of prop names to exclude. This affects not only common build properties but also properties in prop_files.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 footer_files list of string, Files to be appended at the end of build.prop. These files are appended after post_process_props without any further checking.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_config string, Path to a JSON file containing product configs.
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 relative_install_path string, Optional subdirectory under which this file is installed into
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 stem string, Output file name. Defaults to "build.prop"
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

csuite_config

csuite_config generates an App Compatibility Test Suite (C-Suite) configuration file from the <test_config> xml file and stores it in a subdirectory of $(HOST_OUT).
name , arch , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_cross_supported , host_required , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , test_config , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_cross_supported bool, If set to true, build a variant of the module for the host cross. Defaults to true.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 test_config string, Override the default (AndroidTest.xml) test manifest file name.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

dirgroup

dirgroup contains a list of dirs that are referenced by other modules properties using the syntax ":<name>". dirgroup are also be used to export dirs across package boundaries. Currently the only allowed usage is genrule's dir_srcs property.
name , defaults , compile_multilib , debug_ramdisk , device_specific , dirs , dist , dists , enabled , host_required , init_rc , licenses , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 defaults list of string
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
 dirs configurable list of string, dirs lists directories that will be included in this dirgroup
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

filegroup

filegroup contains a list of files that are referenced by other modules properties (such as "srcs") using the syntax ":<name>". filegroup are also be used to export files across package boundaries.
name , srcs , exclude_srcs , defaults , compile_multilib , debug_ramdisk , device_common_srcs , device_first_srcs , device_specific , dist , dists , enabled , export_to_make_var , host_required , init_rc , licenses , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , path , product_specific , product_variables.arc , product_variables.debuggable , product_variables.malloc_low_memory , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 srcs configurable list of string, srcs lists files that will be included in this filegroup
 exclude_srcs configurable list of string
 defaults list of string
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_common_srcs configurable list of string, Sources that will be included in the filegroup, but any module dependencies will be added using the device os and the common architecture's variant.
 device_first_srcs configurable list of string, Sources that will be included in the filegroup, but any module dependencies will be added using the device os and the device's first architecture's variant.
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 export_to_make_var string, Create a make variable with the specified name that contains the list of files in the filegroup, relative to the root of the source tree.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 path string, The base path to the files. May be used by other modules to determine which portion of the path to use. For example, when a filegroup is used as data in a cc_test rule, the base path is stripped off the path and the remaining path is used as the installation directory.
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.arc
⊕exclude_srcs
  []string
⊕srcs
  []string
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕srcs
  []string
⊕exclude_srcs
  []string
⊕product_variables.malloc_low_memory
⊕srcs
  []string
⊕product_variables.native_coverage
⊕srcs
  []string
⊕exclude_srcs
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

filegroup_defaults

name , srcs , exclude_srcs , defaults , host_supported , device_supported , apex_available , arch , compile_multilib , debug_ramdisk , defaults_visibility , device_common_srcs , device_first_srcs , device_specific , dist , dists , enabled , export_to_make_var , host_required , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , path , product_specific , product_variables.arc , product_variables.debuggable , product_variables.malloc_low_memory , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 srcs configurable list of string, srcs lists files that will be included in this filegroup
 exclude_srcs configurable list of string
 defaults list of string
 host_supported bool, If set to true, build a variant of the module for the host. Defaults to false.
 device_supported bool, If set to true, build a variant of the module for the device. Defaults to true.
 apex_available list of string, Availability of this module in APEXes. Only the listed APEXes can contain this module. If the module has stubs then other APEXes and the platform may access it through them (subject to visibility). "//apex_available:anyapex" is a pseudo APEX name that matches to any APEX. "//apex_available:platform" refers to non-APEX partitions like "system.img". Prefix pattern (com.foo.*) can be used to match with any APEX name with the prefix(com.foo.). Default is ["//apex_available:platform"].
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 defaults_visibility list of string, Controls the visibility of the defaults module itself.
 device_common_srcs configurable list of string, Sources that will be included in the filegroup, but any module dependencies will be added using the device os and the common architecture's variant.
 device_first_srcs configurable list of string, Sources that will be included in the filegroup, but any module dependencies will be added using the device os and the device's first architecture's variant.
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 export_to_make_var string, Create a make variable with the specified name that contains the list of files in the filegroup, relative to the root of the source tree.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 path string, The base path to the files. May be used by other modules to determine which portion of the path to use. For example, when a filegroup is used as data in a cc_test rule, the base path is stripped off the path and the remaining path is used as the installation directory.
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.arc
⊕exclude_srcs
  []string
⊕srcs
  []string
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕srcs
  []string
⊕exclude_srcs
  []string
⊕product_variables.malloc_low_memory
⊕srcs
  []string
⊕product_variables.native_coverage
⊕srcs
  []string
⊕exclude_srcs
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

gen_notice

name , defaults , arch , artifactName , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , for , gzipped , host_required , html , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , stem , suffix , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility , xml
 name string, The name of the module. Must be unique across all modules.
 defaults list of string
 arch interface
 artifactName string, ArtifactName specifies the internal name to use for the notice file. It appears in the "used by:" list for targets whose entire name is stripped by --strip_prefix.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 for list of string, For specifies the modules for which to generate a notice file.
 gzipped bool, Gzipped indicates the output file must be compressed with gzip. Will append .gz to suffix if not there.
 host_required list of string, names of other modules to install on host if this module is installed
 html bool, Html indicates an html-format file is needed. The default is text. Can be Html or Xml but not both.
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 stem string, Stem specifies the base name of the output file.
 suffix string, Suffix specifies the file extension to use. Defaults to .html for html, .xml for xml, or no extension for text.
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Visibility specifies where this license can be used
 xml bool, Xml indicates an xml-format file is needed. The default is text. Can be Html or Xml but not both.

license

name , defaults , copyright_notice , license_kinds , license_text , package_name , visibility
 name string, The name of the module. Must be unique across all modules.
 defaults list of string
 copyright_notice string, Specifies a short copyright notice to use for the license.
 license_kinds list of string, Specifies the kinds of license that apply.
 license_text list of string, Specifies the path or label for the text of the license.
 package_name string, Specifies the package name to which the license applies.
 visibility list of string, Specifies where this license can be used

license_kind

name , defaults , conditions , url , visibility
 name string, The name of the module. Must be unique across all modules.
 defaults list of string
 conditions list of string, Specifies the conditions for all licenses of the kind.
 url string, Specifies the url to the canonical license definition.
 visibility list of string, Specifies where this license can be used

otatools_package_cert_files

name , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

package

default_applicable_licenses , default_team , default_visibility
 default_applicable_licenses list of string, Specifies the default license terms for all modules defined in this package.
 default_team string
 default_visibility list of string, Specifies the default visibility for all modules defined in this package.

prebuilt_build_tool

prebuilt_build_tool is to declare prebuilts to be used during the build, particularly for use in genrules with the "tools" property.
name , src , arch , compile_multilib , debug_ramdisk , deps , device_specific , dist , dists , enabled , export_to_make_var , host_required , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , prefer , product_specific , product_variables.debuggable , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , use_source_config_var , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 src string, Source file to be executed for this build tool
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 deps list of string, Extra files that should trigger rules using this tool to rebuild
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 export_to_make_var string, Create a make variable with the specified name that contains the path to this prebuilt built tool, relative to the root of the source tree.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 prefer configurable bool, When prefer is set to true the prebuilt will be used instead of any source module with a matching name.
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕deps
  []string
⊕product_variables.native_coverage
⊕src
  *string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 use_source_config_var ConfigVarProperties, When specified this names a Soong config variable that controls the prefer property. If the value of the named Soong config variable is true then prefer is set to false and vice versa. If the Soong config variable is not set then it defaults to false, so prefer defaults to true. If specified then the prefer property is ignored in favor of the value of the Soong config variable. DEPRECATED: This property is being deprecated b/308188211. Use RELEASE_APEX_CONTRIBUTIONS build flags to select prebuilts of mainline modules.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

product_config

product_config module exports product variables and extra variables as a JSON file.
name , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

recovery_build_prop

name , arch , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_build_prop , odm_dlkm_specific , overrides , owner , product_build_prop , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_build_prop , system_dlkm_specific , system_ext_build_prop , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_build_prop , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_build_prop string, Path to the odm build.prop file
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_build_prop string, Path to the product build.prop file
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_build_prop string, Path to the system build.prop file
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_build_prop string, Path to the system_ext build.prop file
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_build_prop string, Path to the vendor build.prop file
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

removed_package

removed_package will cause a build failure when it's included in PRODUCT_PACKAGES. It's needed because currently you can add non-existent packages to PRODUCT_PACKAGES, and the build will not notice/complain, unless you opt-into enforcement via $(call enforce-product-packages-exist). Opting into the enforcement is difficult in some cases, because a package exists on some source trees but not on others. removed_package is an intermediate solution that allows you to remove a package and still get an error if it remains in PRODUCT_PACKAGES somewhere.
name , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , message , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 message string, The error message to display when this module is built. This is optional, there is a reasonable default message.
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

soong_config_bool_variable

soong_config_string_variable defines a variable with true or false values for use in a soong_config_module_type definition.
name
 name string

soong_config_module_type

soong_config_module_type defines module types with conditionals on Soong config variables. The new module type will exist for all modules after the definition in an Android.bp file, and can be imported into other Android.bp files using soong_config_module_type_import. Each soong_config_variable supports an additional value `conditions_default`. The properties specified in `conditions_default` will only be used under the following conditions: 

	bool variable: the variable is unspecified or not set to a true value
	value variable: the variable is unspecified
	list variable: the variable is unspecified
	string variable: the variable is unspecified or the variable is set to a string unused in the
	                 given module. For example, string variable `test` takes values: "a" and "b",
	                 if the module contains a property `a` and `conditions_default`, when test=b,
	                 the properties under `conditions_default` will be used. To specify that no
	                 properties should be amended for `b`, you can set `b: {},`.
For example, an Android.bp file could have: 

	soong_config_module_type {
	    name: "acme_cc_defaults",
	    module_type: "cc_defaults",
	    config_namespace: "acme",
	    variables: ["board"],
	    bool_variables: ["feature"],
	    value_variables: ["width"],
	    list_variables: ["impl"],
	    properties: ["cflags", "srcs"],
	}

	soong_config_string_variable {
	    name: "board",
	    values: ["soc_a", "soc_b"],
	}

	acme_cc_defaults {
	    name: "acme_defaults",
	    cflags: ["-DGENERIC"],
	    soong_config_variables: {
	        board: {
	            soc_a: {
	                cflags: ["-DSOC_A"],
	            },
	            soc_b: {
	                cflags: ["-DSOC_B"],
	            },
	            conditions_default: {
	                cflags: ["-DSOC_DEFAULT"],
	            },
	        },
	        feature: {
	            cflags: ["-DFEATURE"],
	            conditions_default: {
	                cflags: ["-DFEATURE_DEFAULT"],
	            },
	        },
	        width: {
	            cflags: ["-DWIDTH=%s"],
	            conditions_default: {
	                cflags: ["-DWIDTH=DEFAULT"],
	            },
	        },
	        impl: {
	            srcs: ["impl/%s"],
	            conditions_default: {
	                srcs: ["impl/default.cpp"],
	            },
	        },
	    },
	}

	cc_library {
	    name: "libacme_foo",
	    defaults: ["acme_defaults"],
	    srcs: ["*.cpp"],
	}
If an acme BoardConfig.mk file contained: 

	SOONG_CONFIG_NAMESPACES += acme
	SOONG_CONFIG_acme += \
	    board \
	    feature \

	SOONG_CONFIG_acme_board := soc_a
	SOONG_CONFIG_acme_feature := true
	SOONG_CONFIG_acme_width := 200
	SOONG_CONFIG_acme_impl := foo.cpp bar.cpp
Then libacme_foo would build with cflags "-DGENERIC -DSOC_A -DFEATURE" and srcs ["*.cpp", "impl/foo.cpp", "impl/bar.cpp"].
name , bool_variables , config_namespace , list_variables , module_type , properties , value_variables , variables
 name string, the name of the new module type. Unlike most modules, this name does not need to be unique, although only one module type with any name will be importable into an Android.bp file.
 bool_variables list of string, the list of boolean SOONG_CONFIG variables that this module type will read
 config_namespace string, the SOONG_CONFIG_NAMESPACE value from a BoardConfig.mk that this module type will read configuration variables from.
 list_variables list of string, the list of SOONG_CONFIG list variables that this module type will read. Each value will be inserted into the properties with %s substitution.
 module_type string, the module type that this module type will extend.
 properties list of string, the list of properties that this module type will extend.
 value_variables list of string, the list of SOONG_CONFIG variables that this module type will read. The value will be inserted into the properties with %s substitution.
 variables list of string, the list of SOONG_CONFIG variables that this module type will read

soong_config_module_type_import

from , module_types
 from string
 module_types list of string

soong_config_string_variable

soong_config_string_variable defines a variable and a set of possible string values for use in a soong_config_module_type definition.
name , values
 name string
 values list of string

soong_config_value_variable

soong_config_value_variable defines a variable whose value can be expanded into the value of a string property.
name
 name string

soong_namespace

soong_namespace provides a scope to modules in an Android.bp file to prevent module name conflicts with other defined modules in different Android.bp files. Once soong_namespace has been defined in an Android.bp file, the namespacing is applied to all modules that follow the soong_namespace in the current Android.bp file, as well as modules defined in Android.bp files in subdirectories. An Android.bp file in a subdirectory can define its own soong_namespace which is applied to all its modules and as well as modules defined in subdirectories Android.bp files. Modules in a soong_namespace are visible to Make by listing the namespace path in PRODUCT_SOONG_NAMESPACES make variable in a makefile.
imports
 imports list of string, a list of namespaces that contain modules that will be referenced by modules in this namespace.

system_dev_certificate

name , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

team

name , defaults , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target.android , target.host , target_required , team , trendy_team_id , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 defaults list of string
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 trendy_team_id string
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

vintf_data

vintf_fragment module processes vintf fragment file and installs under etc/vintf/manifest.
name , arch , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , filename , host_required , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , type , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 filename string, Optional name for the installed file. If unspecified it will be manifest.xml by default.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 type string, Type of the vintf data type, the allowed type are device_compatibility_matrix, system_manifest, product_manifest, and system_ext_manifest.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

vintf_fragment

vintf_fragment module processes vintf fragment file and installs under etc/vintf/manifest. Vintf fragment files formerly listed in vintf_fragment property would be transformed into this module type.
name , src , arch , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , host_required , init_rc , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 src string, Vintf fragment XML file.
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.native_coverage
⊕src
  *string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.