blueprint_go_binary

name , srcs , arch , compile_multilib , darwin.srcs , darwin.testsrcs , debug_ramdisk , default , deps , device_specific , dist , dists , embedsrcs , enabled , host_cross_supported , host_required , init_rc , licenses , linux.srcs , linux.testsrcs , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , primarybuilder , product_specific , product_variables.arc , product_variables.debuggable , product_variables.malloc_low_memory , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , testdata , testsrcs , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
⊕srcs
  []string
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
⊕darwin.srcs
  []string
⊕darwin.testsrcs
  []string
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
⊕default bool
 bool bool
⊕deps
  []string
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
⊕embedsrcs
  []string
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_cross_supported bool, If set to true, build a variant of the module for the host cross. Defaults to true.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
⊕linux.srcs
  []string
⊕linux.testsrcs
  []string
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
⊕primarybuilder bool
 bool bool
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.arc
⊕srcs
  []string
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕srcs
  []string
⊕deps
  []string
⊕product_variables.malloc_low_memory
⊕srcs
  []string
⊕product_variables.native_coverage
⊕srcs
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
⊕testdata
  []string
⊕testsrcs
  []string
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
⊕visibility
  []string

bootstrap_go_package

name , srcs , arch , compile_multilib , darwin.srcs , darwin.testsrcs , debug_ramdisk , deps , device_specific , dist , dists , embedsrcs , enabled , host_cross_supported , host_required , init_rc , licenses , linux.srcs , linux.testsrcs , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , pkgpath , pluginfor , product_specific , product_variables.arc , product_variables.debuggable , product_variables.malloc_low_memory , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , recovery , required , soc_specific , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , testdata , testsrcs , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
⊕srcs
  []string
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
⊕darwin.srcs
  []string
⊕darwin.testsrcs
  []string
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
⊕deps
  []string
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
⊕embedsrcs
  []string
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 host_cross_supported bool, If set to true, build a variant of the module for the host cross. Defaults to true.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
⊕linux.srcs
  []string
⊕linux.testsrcs
  []string
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
⊕pkgpath string
 string string
⊕pluginfor
  []string
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.arc
⊕srcs
  []string
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕srcs
  []string
⊕deps
  []string
⊕product_variables.malloc_low_memory
⊕srcs
  []string
⊕product_variables.native_coverage
⊕srcs
  []string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 recovery bool, Whether this module is installed to recovery partition
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
⊕testdata
  []string
⊕testsrcs
  []string
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
⊕visibility
  []string