sh_binary

sh_binary is for a shell script or batch file to be installed as an executable binary to <partition>/bin.
name , src , defaults , host_supported , device_supported , arch , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , filename , filename_from_src , host_cross_supported , host_required , init_rc , installable , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , ramdisk_available , recovery , recovery_available , required , soc_specific , sub_dir , symlinks , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vendor_ramdisk_available , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 src string, Source file of this prebuilt.
 defaults list of string
 host_supported bool, If set to true, build a variant of the module for the host. Defaults to false.
 device_supported bool, If set to true, build a variant of the module for the device. Defaults to true.
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 filename string, optional name for the installed file. If unspecified, name of the module is used as the file name
 filename_from_src bool, when set to true, and filename property is not set, the name for the installed file is the same as the file name of the source file.
 host_cross_supported bool, If set to true, build a variant of the module for the host cross. Defaults to true.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 installable bool, Whether this module is directly installable to one of the partitions. Default: true.
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.native_coverage
⊕src
  *string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 ramdisk_available bool, Make this module available when building for ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 recovery bool, Whether this module is installed to recovery partition
 recovery_available bool, Make this module available when building for recovery.
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 sub_dir string, optional subdirectory under which this file is installed into
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vendor_ramdisk_available bool, Make this module available when building for vendor ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

sh_binary_host

sh_binary_host is for a shell script to be installed as an executable binary to $(HOST_OUT)/bin.
name , src , defaults , arch , compile_multilib , debug_ramdisk , device_specific , dist , dists , enabled , filename , filename_from_src , host_cross_supported , host_required , init_rc , installable , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , product_specific , product_variables.debuggable , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , ramdisk_available , recovery , recovery_available , required , soc_specific , sub_dir , symlinks , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vendor_ramdisk_available , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 src string, Source file of this prebuilt.
 defaults list of string
 arch interface
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 filename string, optional name for the installed file. If unspecified, name of the module is used as the file name
 filename_from_src bool, when set to true, and filename property is not set, the name for the installed file is the same as the file name of the source file.
 host_cross_supported bool, If set to true, build a variant of the module for the host cross. Defaults to true.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 installable bool, Whether this module is directly installable to one of the partitions. Default: true.
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.native_coverage
⊕src
  *string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 ramdisk_available bool, Make this module available when building for ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 recovery bool, Whether this module is installed to recovery partition
 recovery_available bool, Make this module available when building for recovery.
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 sub_dir string, optional subdirectory under which this file is installed into
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vendor_ramdisk_available bool, Make this module available when building for vendor ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

sh_defaults

name , src , defaults , host_supported , device_supported , apex_available , arch , auto_gen_config , compile_multilib , data , data_bins , data_device_bins , data_device_libs , data_libs , debug_ramdisk , defaults_visibility , device_common_data , device_first_data , device_specific , dist , dists , enabled , extra_test_configs , filename , filename_from_src , host_common_data , host_required , init_rc , installable , java_data , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , per_testcase_directory , product_specific , product_variables.debuggable , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , ramdisk_available , recovery , recovery_available , require_root , required , soc_specific , sub_dir , symlinks , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , test_config , test_config_template , test_options , test_suites , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vendor_ramdisk_available , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 src string, Source file of this prebuilt.
 defaults list of string
 host_supported bool, If set to true, build a variant of the module for the host. Defaults to false.
 device_supported bool, If set to true, build a variant of the module for the device. Defaults to true.
 apex_available list of string, Availability of this module in APEXes. Only the listed APEXes can contain this module. If the module has stubs then other APEXes and the platform may access it through them (subject to visibility). "//apex_available:anyapex" is a pseudo APEX name that matches to any APEX. "//apex_available:platform" refers to non-APEX partitions like "system.img". Prefix pattern (com.foo.*) can be used to match with any APEX name with the prefix(com.foo.). Default is ["//apex_available:platform"].
 arch interface
 auto_gen_config bool, Flag to indicate whether or not to create test config automatically. If AndroidTest.xml doesn't exist next to the Android.bp, this attribute doesn't need to be set to true explicitly.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 data list of string, list of files or filegroup modules that provide data that should be installed alongside the test.
 data_bins list of string, list of binary modules that should be installed alongside the test
 data_device_bins list of string, list of device binary modules that should be installed alongside the test. Only available for host sh_test modules.
 data_device_libs list of string, list of device library modules that should be installed alongside the test. Only available for host sh_test modules.
 data_libs list of string, list of library modules that should be installed alongside the test
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 defaults_visibility list of string, Controls the visibility of the defaults module itself.
 device_common_data list of string, same as data, but adds dependencies using the device's os variation and the common architecture's variation. Can be used to add a module built for device to the data of a host test.
 device_first_data list of string, same as data, but adds dependencies using the device's os variation and the device's first architecture's variation. Can be used to add a module built for device to the data of a host test.
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 extra_test_configs list of string, a list of extra test configuration files that should be installed with the module.
 filename string, optional name for the installed file. If unspecified, name of the module is used as the file name
 filename_from_src bool, when set to true, and filename property is not set, the name for the installed file is the same as the file name of the source file.
 host_common_data list of string, Same as data, but will add dependencies on modules using the host's os variation and the common arch variation. Useful for a device test that wants to depend on a host module, for example to include a custom Tradefed test runner.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 installable bool, Whether this module is directly installable to one of the partitions. Default: true.
 java_data list of string, list of java modules that provide data that should be installed alongside the test.
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 per_testcase_directory bool, Install the test into a folder named for the module in all test suites.
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.native_coverage
⊕src
  *string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 ramdisk_available bool, Make this module available when building for ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 recovery bool, Whether this module is installed to recovery partition
 recovery_available bool, Make this module available when building for recovery.
 require_root bool, Add RootTargetPreparer to auto generated test config. This guarantees the test to run with root permission.
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 sub_dir string, optional subdirectory under which this file is installed into
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 test_config string, the name of the test configuration (for example "AndroidTest.xml") that should be installed with the module.
 test_config_template string, the name of the test configuration template (for example "AndroidTestTemplate.xml") that should be installed with the module.
⊕test_options *ast.SelectorExpr
Test options.
 unit_test bool, If the test is a hostside (no device required) unittest that shall be run during presubmit check.
 tags list of string, Tags provide additional metadata to customize test execution by downstream test runners. The tags have no special meaning to Soong.
 test_suites list of string, list of compatibility suites (for example "cts", "vts") that the module should be installed into.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vendor_ramdisk_available bool, Make this module available when building for vendor ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

sh_test

sh_test defines a shell script based test module.
name , src , defaults , host_supported , device_supported , arch , auto_gen_config , compile_multilib , data , data_bins , data_device_bins , data_device_libs , data_libs , debug_ramdisk , device_common_data , device_first_data , device_specific , dist , dists , enabled , extra_test_configs , filename , filename_from_src , host_common_data , host_cross_supported , host_required , init_rc , installable , java_data , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , per_testcase_directory , product_specific , product_variables.debuggable , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , ramdisk_available , recovery , recovery_available , require_root , required , soc_specific , sub_dir , symlinks , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , test_config , test_config_template , test_options , test_suites , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vendor_ramdisk_available , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 src string, Source file of this prebuilt.
 defaults list of string
 host_supported bool, If set to true, build a variant of the module for the host. Defaults to false.
 device_supported bool, If set to true, build a variant of the module for the device. Defaults to true.
 arch interface
 auto_gen_config bool, Flag to indicate whether or not to create test config automatically. If AndroidTest.xml doesn't exist next to the Android.bp, this attribute doesn't need to be set to true explicitly.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 data list of string, list of files or filegroup modules that provide data that should be installed alongside the test.
 data_bins list of string, list of binary modules that should be installed alongside the test
 data_device_bins list of string, list of device binary modules that should be installed alongside the test. Only available for host sh_test modules.
 data_device_libs list of string, list of device library modules that should be installed alongside the test. Only available for host sh_test modules.
 data_libs list of string, list of library modules that should be installed alongside the test
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_common_data list of string, same as data, but adds dependencies using the device's os variation and the common architecture's variation. Can be used to add a module built for device to the data of a host test.
 device_first_data list of string, same as data, but adds dependencies using the device's os variation and the device's first architecture's variation. Can be used to add a module built for device to the data of a host test.
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 extra_test_configs list of string, a list of extra test configuration files that should be installed with the module.
 filename string, optional name for the installed file. If unspecified, name of the module is used as the file name
 filename_from_src bool, when set to true, and filename property is not set, the name for the installed file is the same as the file name of the source file.
 host_common_data list of string, Same as data, but will add dependencies on modules using the host's os variation and the common arch variation. Useful for a device test that wants to depend on a host module, for example to include a custom Tradefed test runner.
 host_cross_supported bool, If set to true, build a variant of the module for the host cross. Defaults to true.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 installable bool, Whether this module is directly installable to one of the partitions. Default: true.
 java_data list of string, list of java modules that provide data that should be installed alongside the test.
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 per_testcase_directory bool, Install the test into a folder named for the module in all test suites.
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.native_coverage
⊕src
  *string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 ramdisk_available bool, Make this module available when building for ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 recovery bool, Whether this module is installed to recovery partition
 recovery_available bool, Make this module available when building for recovery.
 require_root bool, Add RootTargetPreparer to auto generated test config. This guarantees the test to run with root permission.
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 sub_dir string, optional subdirectory under which this file is installed into
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 test_config string, the name of the test configuration (for example "AndroidTest.xml") that should be installed with the module.
 test_config_template string, the name of the test configuration template (for example "AndroidTestTemplate.xml") that should be installed with the module.
⊕test_options *ast.SelectorExpr
Test options.
 unit_test bool, If the test is a hostside (no device required) unittest that shall be run during presubmit check.
 tags list of string, Tags provide additional metadata to customize test execution by downstream test runners. The tags have no special meaning to Soong.
 test_suites list of string, list of compatibility suites (for example "cts", "vts") that the module should be installed into.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vendor_ramdisk_available bool, Make this module available when building for vendor ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.

sh_test_host

sh_test_host defines a shell script based test module that runs on a host.
name , src , defaults , arch , auto_gen_config , compile_multilib , data , data_bins , data_device_bins , data_device_libs , data_libs , debug_ramdisk , device_common_data , device_first_data , device_specific , dist , dists , enabled , extra_test_configs , filename , filename_from_src , host_common_data , host_cross_supported , host_required , init_rc , installable , java_data , licenses , multilib , native_bridge_supported , no_full_install , odm_dlkm_specific , overrides , owner , per_testcase_directory , product_specific , product_variables.debuggable , product_variables.native_coverage , product_variables.release_aidl_use_unfrozen , product_variables.selinuxignoreneverallows , product_variables.unbundled_build , proprietary , ramdisk , ramdisk_available , recovery , recovery_available , require_root , required , soc_specific , sub_dir , symlinks , system_dlkm_specific , system_ext_specific , target , target.android , target.host , target_required , team , test_config , test_config_template , test_options , test_suites , use_generic_config , vendor , vendor_dlkm_specific , vendor_ramdisk , vendor_ramdisk_available , vintf_fragment_modules , vintf_fragments , visibility
 name string, The name of the module. Must be unique across all modules.
 src string, Source file of this prebuilt.
 defaults list of string
 arch interface
 auto_gen_config bool, Flag to indicate whether or not to create test config automatically. If AndroidTest.xml doesn't exist next to the Android.bp, this attribute doesn't need to be set to true explicitly.
 compile_multilib string, control whether this module compiles for 32-bit, 64-bit, or both. Possible values are "32" (compile for 32-bit only), "64" (compile for 64-bit only), "both" (compile for both architectures), or "first" (compile for 64-bit on a 64-bit platform, and 32-bit on a 32-bit platform).
 data list of string, list of files or filegroup modules that provide data that should be installed alongside the test.
 data_bins list of string, list of binary modules that should be installed alongside the test
 data_device_bins list of string, list of device binary modules that should be installed alongside the test. Only available for host sh_test modules.
 data_device_libs list of string, list of device library modules that should be installed alongside the test. Only available for host sh_test modules.
 data_libs list of string, list of library modules that should be installed alongside the test
 debug_ramdisk bool, Whether this module is installed to debug ramdisk
 device_common_data list of string, same as data, but adds dependencies using the device's os variation and the common architecture's variation. Can be used to add a module built for device to the data of a host test.
 device_first_data list of string, same as data, but adds dependencies using the device's os variation and the device's first architecture's variation. Can be used to add a module built for device to the data of a host test.
 device_specific bool, whether this module is specific to a device, not only for SoC, but also for off-chip peripherals. When set to true, it is installed into /odm (or /vendor/odm if odm partition does not exist, or /system/vendor/odm if both odm and vendor partitions do not exist). This implies `soc_specific:true`.
⊕dist Dist
configuration to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 targets list of string, Copy the output of this module to the $DIST_DIR when `dist` is specified on the command line and any of these targets are also on the command line, or otherwise built
 dest string, The name of the output artifact. This defaults to the basename of the output of the module.
 dir string, The directory within the dist directory to store the artifact. Defaults to the top level directory ("").
 suffix string, A suffix to add to the artifact file name (before any extension).
 append_artifact_with_product bool, If true, then the artifact file will be appended with _<product name>. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be foo_coral.apk. If false, there is no change to the artifact file name.
 prepend_artifact_with_product bool, If true, then the artifact file will be prepended with <product name>-. For example, if the product is coral and the module is an android_app module of name foo, then the artifact would be coral-foo.apk. If false, there is no change to the artifact file name.
 tag string, A string tag to select the OutputFiles associated with the tag. If no tag is specified then it will select the default dist paths provided by the module type. If a tag of "" is specified then it will return the default output files provided by the modules, i.e. the result of calling OutputFiles("").
 dists list of Dist, a list of configurations to distribute output files from this module to the distribution directory (default: $OUT/dist, configurable with $DIST_DIR)
 enabled configurable bool, emit build rules for this module Disabling a module should only be done for those modules that cannot be built in the current environment. Modules that can build in the current environment but are not usually required (e.g. superceded by a prebuilt) should not be disabled as that will prevent them from being built by the checkbuild target and so prevent early detection of changes that have broken those modules.
 extra_test_configs list of string, a list of extra test configuration files that should be installed with the module.
 filename string, optional name for the installed file. If unspecified, name of the module is used as the file name
 filename_from_src bool, when set to true, and filename property is not set, the name for the installed file is the same as the file name of the source file.
 host_common_data list of string, Same as data, but will add dependencies on modules using the host's os variation and the common arch variation. Useful for a device test that wants to depend on a host module, for example to include a custom Tradefed test runner.
 host_cross_supported bool, If set to true, build a variant of the module for the host cross. Defaults to true.
 host_required list of string, names of other modules to install on host if this module is installed
 init_rc configurable list of string, init.rc files to be installed if this module is installed
 installable bool, Whether this module is directly installable to one of the partitions. Default: true.
 java_data list of string, list of java modules that provide data that should be installed alongside the test.
 licenses list of string, Describes the licenses applicable to this module. Must reference license modules.
 multilib interface
 native_bridge_supported bool, Whether this module is built for non-native architectures (also known as native bridge binary)
 no_full_install bool, When set to true, this module is not installed to the full install path (ex: under out/target/product/<name>/<partition>). It can be installed only to the packaging modules like android_filesystem.
 odm_dlkm_specific bool, Install to partition odm_dlkm when set to true.
 overrides list of string, List of module names that are prevented from being installed when this module gets installed.
 owner string, vendor who owns this module
 per_testcase_directory bool, Install the test into a folder named for the module in all test suites.
 product_specific bool, whether this module is specific to a software configuration of a product (e.g. country, network operator, etc). When set to true, it is installed into /product (or /system/product if product partition does not exist).
⊕product_variables.debuggable
⊕init_rc
  []string
⊕required
  []string
⊕host_required
  []string
⊕target_required
  []string
⊕product_variables.native_coverage
⊕src
  *string
⊕product_variables.release_aidl_use_unfrozen
⊕required
  []string
⊕vintf_fragment_modules
  []string
⊕product_variables.selinuxignoreneverallows
⊕required
  []string
⊕product_variables.unbundled_build
⊕enabled Configurable[bool]
 Configurable[bool] proptools.Configurable[bool]
 proprietary bool, whether this is a proprietary vendor module, and should be installed into /vendor
 ramdisk bool, Whether this module is installed to ramdisk
 ramdisk_available bool, Make this module available when building for ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 recovery bool, Whether this module is installed to recovery partition
 recovery_available bool, Make this module available when building for recovery.
 require_root bool, Add RootTargetPreparer to auto generated test config. This guarantees the test to run with root permission.
 required configurable list of string, names of other modules to install if this module is installed
 soc_specific bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist).
 sub_dir string, optional subdirectory under which this file is installed into
 system_dlkm_specific bool, Install to partition system_dlkm when set to true.
 system_ext_specific bool, whether this module extends system. When set to true, it is installed into /system_ext (or /system/system_ext if system_ext partition does not exist).
 target interface
⊕target.android
 compile_multilib string
 enabled bool
⊕target.host
 compile_multilib string
 target_required list of string, names of other modules to install on target if this module is installed
 team string, The team (defined by the owner/vendor) who owns the property.
 test_config string, the name of the test configuration (for example "AndroidTest.xml") that should be installed with the module.
 test_config_template string, the name of the test configuration template (for example "AndroidTestTemplate.xml") that should be installed with the module.
⊕test_options *ast.SelectorExpr
Test options.
 unit_test bool, If the test is a hostside (no device required) unittest that shall be run during presubmit check. Default: true
 tags list of string, Tags provide additional metadata to customize test execution by downstream test runners. The tags have no special meaning to Soong.
 test_suites list of string, list of compatibility suites (for example "cts", "vts") that the module should be installed into.
 use_generic_config bool, Set to true if this module must be generic and does not require product-specific information. To be included in the system image, this property must be set to true.
 vendor bool, whether this module is specific to an SoC (System-On-a-Chip). When set to true, it is installed into /vendor (or /system/vendor if vendor partition does not exist). Use `soc_specific` instead for better meaning.
 vendor_dlkm_specific bool, Install to partition vendor_dlkm when set to true.
 vendor_ramdisk bool, Whether this module is installed to vendor ramdisk
 vendor_ramdisk_available bool, Make this module available when building for vendor ramdisk. On device without a dedicated recovery partition, the module is only available after switching root into /first_stage_ramdisk. To expose the module before switching root, install the recovery variant instead.
 vintf_fragment_modules configurable list of string, vintf_fragment Modules required from this module.
 vintf_fragments configurable list of string, VINTF manifest fragments to be installed if this module is installed
 visibility list of string, Controls the visibility of this module to other modules. Allowable values are one or more of these formats: 

 ["//visibility:public"]: Anyone can use this module.
 ["//visibility:private"]: Only rules in the module's package (not its subpackages) can use
     this module.
 ["//visibility:override"]: Discards any rules inherited from defaults or a creating module.
     Can only be used at the beginning of a list of visibility rules.
 ["//some/package:__pkg__", "//other/package:__pkg__"]: Only modules in some/package and
     other/package (defined in some/package/*.bp and other/package/*.bp) have access to
     this module. Note that sub-packages do not have access to the rule; for example,
     //some/package/foo:bar or //other/package/testing:bla wouldn't have access. __pkg__
     is a special module and must be used verbatim. It represents all of the modules in the
     package.
 ["//project:__subpackages__", "//other:__subpackages__"]: Only modules in packages project
     or other or in one of their sub-packages have access to this module. For example,
     //project:rule, //project/library:lib or //other/testing/internal:munge are allowed
     to depend on this rule (but not //independent:evil)
 ["//project"]: This is shorthand for ["//project:__pkg__"]
 [":__subpackages__"]: This is shorthand for ["//project:__subpackages__"] where
     //project is the module's package. e.g. using [":__subpackages__"] in
     packages/apps/Settings/Android.bp is equivalent to
     //packages/apps/Settings:__subpackages__.
 ["//visibility:legacy_public"]: The default visibility, behaves as //visibility:public
     for now. It is an error if it is used in a module.
If a module does not specify the `visibility` property then it uses the `default_visibility` property of the `package` module in the module's package. If the `default_visibility` property is not set for the module's package then it will use the `default_visibility` of its closest ancestor package for which a `default_visibility` property is specified. If no `default_visibility` property can be found then the module uses the global default of `//visibility:legacy_public`. The `visibility` property has no effect on a defaults module although it does apply to any non-defaults module that uses it. To set the visibility of a defaults module, use the `defaults_visibility` property on the defaults module; not to be confused with the `default_visibility` property on the package module. See https://android.googlesource.com/platform/build/soong/+/main/README.md#visibility for more details.